DURATRON^® T4501 PAI (TORLON^® 4501 PAI)

DURATRON PAI will be referred to as TORLON PAI below

Main Characteristics:

		Grades
		DURATRON T4203 PAI (TORLON 4203 PAI)
		DURATRON T4301 PAI (TORLON 4301 PAI)
		DURATRON T4501 PAI (TORLON 4501 PAI)
		DURATRON T4503 PAI (TORLON 4503 PAI)
		DURATRON T5530 PAI(TORLON 5530 PAI)
Technical Information

• Very high maximum allowable service temperature in air (260°C continuously)
• Excellent retention of mechanical strength, stiffness and creep resistance over a wide temperature range
• Superb dimensional stability up to 260°C
• Excellent wear & frictional behaviour (particulary TORLON 4301 & 4501 PAI)
• Very good UV-resistance
• Exceptional resistance against high energy radiation (gamma- and X-rays)
• Inherent low flammability

Material Safety Data Sheet

Product Data Sheet

Delivery Programme

Available Literature

Grade Information:

TORLON 4501 PAI      black     [PAI + graphite + PTFE]  

The addition of PTFE and graphite provides higher wear resistance and lower coefficient of friction compared to the unfilled grade as well as a lower tendency to stick-slip. TORLON 4301 PAI also offers excellent dimensional stability over a wide temperature range. This extruded TORLON PAI grade excels in severe wear applications such as non-lubricated bearings, seals, bearing cages and reciprocating compressor parts. Compression moulded TORLON 4501 PAI is similar in composition to TORLON 4301 PAI, and is selected when larger shapes are required.